i NSIGHT™ 700c Scanner

The i NSIGHT™ 700c is our medium-volume solution for automated data capture applications that demand high-speed image capture for archiving and audit. With processing speeds up to 6,600 sheets per hour, the i NSIGHT 700c is an affordable choice for data processing projects that require the capture of both traditional OMR (optical mark read) data and image data.
General Page Feature
Contact Us for a Free 15 minute consultation.
Flex Modes
Sys Reqs

Physical Description

Length: 32” (81 cm)
Height: 9” (23 cm)
Width: 13.75” (35 cm)
Weight: 42 lbs (19 kg)


Operating Temperature: 60° to 85° F (16° to 29° C)
Humidity: 40% to 60% non-condensing
Heat Dissipation: 2,600 BTUs per hour total system


100–240 VAC +/-10% single phase; 47–63 Hz +/-5%; requires 15 amp dedicated circuit, single phase


USB 3.0 connection


2.5” x 5” to 9” x 14” (60-100 lb. Offset); uses both Mark Reflex and Trans-Optic forms.
Form Input Capacity: Autofeed 500 sheets.
Output Stacker Capacity: 500 sheets.
Controls: One push button switch.
Scanning Rate: up to 6,600 sheets per hour (Actual scanning rate depends on quantity of data read from the form and the amount of processing done on that data while scanning).


Read Head: pencil, ink, and image scan; 16 level mark discrimination, 256 grayscale levels, 16 million colors; self-calibrating read head; two sided reflective read; Scantron .166”, 0.200", and 0.300" formats
Form Transport: Automatic feed; open design
Barcode capture: Barcodes captured as image snippets, then interpreted by software

Software Interfaces 

The iNSIGHT 700c scanner is compatible with ScanTools® Prisma. This software allows you to maintain files and define scannable forms—plus scan, edit, validate and display data. For added value, the software converts files of scanned data into formats compatible with other commonly used packages, such as Microsoft® Access, Excel, Lotus® and SPSS® software.

 Spacings  .166, .166 48 cell, .200 inline, .200 offset, .200 line read, and .300 line read